【 How to correctly install fireproof glass walls 】

1. Check each piece of fireproof glass before installation: whether the size is accurate, the integrity of the corners, scratches, wear, and the quantity meets the contract agreement. During the inspection process, the glass supplier logo shall not be torn off without instructions, and shall be carried out in accordance with the fire-proof glass installation instructions and drawings.

2. Check and remove the residue or protruding objects on the window frame body.

3, the installation of gaskets on the window frame, can use rubber, wood blocks as gasket materials, and then according to the need to cut the size and quantity, the standard width and thickness of the cut gasket placed on the window frame, the purpose is to waterproof and anti-air protection in the corner and connection parts.

4, fireproof glass before the factory in order to prevent the components of the glass glue erosion into the glass inside the use of edge sealant for protection, before installation need to confirm whether the edge sealant is intact, if part of the edge sealant falls off, installation - need to re-fill the edge sealant.

5, when the fire glass is formally installed, the Logo below is the correct installation or placement orientation, such as incorrect storage may occur leakage and other problems, the protective film can not be torn off before completion.

6, the fixed fireproof glass can be installed outside the frame, pay attention to the outer frame can not touch the glass, no welding sparks burn the glass, sand or other hard objects touching the glass will cause irreparable damage.

7, need to use non-acid glass glue fixed after installation.

  Daily use: The daily principle of fireproof glass strong acid and alkali chemicals, will lead to changes in the nature of the glass itself; Keep the place of use dry; If the glass surface is stained with oil, it is recommended to use a wet towel or special glass cleaner to scrub, not acid cleaners. When the fireproof glass is cracked, scratched, etc., it indicates that the performance has been damaged and should be replaced in time.

  The products provided by Zhenwei Engineering include fireproof glass doors, fireproof wooden doors and fireproof steel doors, bringing a diversified product and creating a safe environment for Macau. For more information on fire protection products, please call our hotline at 853 28424213 or our email address at mat@zenwaymo.com.

Article from: http://www.hbglass.net/